C-band LNBF C1W-PLL Wideband 65dB Gain- Phase Lock Loop 3.4-4.2GHz Satellite LNB

$20.32 (-40%)

337

  • Custom Bundle: No
  • MPN: C1W-PLL
  • Reference: Phase Lock Loop
  • Type: Wideband
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Compatible Satellite Dish: FTA
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Number of Outputs: 1 (Single-Output)
  • Non-Domestic Product: No
  • Country/Region of Manufacture: China
  • Return shipping will be paid by: Seller
  • Condition: New
  • Modified Item: No
  • Brand: Titanium Satellite
  • Frequency Band: C
  • Best Stability! Excellent Performance! Lifetime Warranty!
    Titanium Satellite C1W-PLL Wideband C-band LNBF
    (3.4-4.2GHz) Phase Lock Loop
    Check out the product review of the C1W-PLL Wideband LNBF in
    Tele AudioVision magazine
    Why Buy from Titanium Satellite?
    We are Satellite Experts with over 30 years experience with residential / commercial installation and service. Absolutely the best customer support for every product we sell! If we don’t use it in our own homes, we don’t sell it!
    World’s first PLL C-band Wideband LNBF
    The Titanium Satellite
    C1-PLL
    ® Wideband LNBF features the simplicity of voltage controlled polarity selection with exceptional performance and stability across the entire international wideband C-band range of 3.4 – 4.2GHz. The
    C1WPLL
    is perfect for reliable reception of S2, high FEC and narrow bandwidth satellite transponders.
    Important Notice:
    Need to filter out interference caused by WiMAX, 4G, LTE, wide area WiFi or Radar? See our popular Titanium Satellite
    C1-PLL
    ®
    model with soft attenuation from 3.6-3.7GHz and hard elimination filter below 3.6GHz.
    Performance
    This innovative single output model is developed using the latest PLL chipsets with a balance of gain, isolation, stability and amplification to produce a Phase Look Loop C-Band LNBF that outperforms all other C-Band LNBFs. All Titanium Satellite products are factory line tested multiple times to assure specification compliance and performance. In addition, all products are inspected by an independent third party service to insure complete manufacturing and performance compliance. Any product found not to meet our exacting “A” grade requirements is either reworked and certified to “A” grade performance or destroyed. Unlike competitors, there is no 2nd market for “B” grade Titanium products!
    Cool
    We have all heard the comment, “Looks Aren’t Everything”. This statement is so true! The
    C1W-PLL
    with the heavy cast aluminum mass and thick wall housing sports a glossy snow white color protective finish. This attractive finish with offsetting cool grey and zinc coated silver hardware not only looks great, but it also reduces overheating when exposed to direct sunlight. The natural color aluminum cooling fins also assist in dissipating heat from the electronics and body mass resulting in a lower operating temperature with increased performance.
    Design
    The craftsmanship, quality components and innovative design make the
    C1WPLL
    superior to any C-band LNBF available on the market. The C1W-PLL is provided with a secure fitting, Royal Blue color feedhorn cover, dielectric slab insert for circular C-band reception and mounting hardware. The included universal flat type three ring scalar is tapped for mounting on button hook, three and four leg prime focus dish designs. All Titanium hardware is secured with seven silver zinc coated Allen Head type screws and provided hex key tool.
    WaterProof
    Titanium Satellite also introduces to C-band LNBF production the waterproof, 3GHz F-fitting coax connection. After noting the cheap coax connections used on several competitor C-band LNBFs which had clinch point damage after only a few insertions, we requested the manufacturer to source a component upgrade to a 3GHz fitting. Yes, the upgraded fitting costs 10 cents more, but why go cheap?
    Value
    While a traditional corotor design with the mechanical polarity controller provides increased performance and fine-tuning adjustments for overcoming interference and optimizing reception, many hobbyists and satellite viewers do not wish to be bothered with the additional expense, complexity and control limitations of this traditional feedhorn design. The
    C1W-PLL
    is a simple way to increase performance and signal reliability of your BUD (Big Ugly Dish) without breaking the bank! The low MSRP yields a solid investment in improving your C-band system performance.
    Comparison
    How does the
    C1-PLL
    series perform? See on the Titanium Satellite website how a Titanium
    C1PLL
    series C-band LNBF performed in this side-by-side shoot out on the 58w satellite, Intelsat 21 on a 7.5ft (2.4m) Sami dish. The
    C1W-PLL
    is setting new performance standards for next generation C-band LNBFs!
    Important Notice:
    Titanium Satellite is the developer of the world’s first PLL LNBFs.
    Don’t be fooled by imitations, clones and copycats with their inferior
    performance. These copied products may carry our registered trademark C1 PLL and
    C2 PLL model names, but they are not the original Titanium Satellite
    products and are not licensed or authorized by Titanium Satellite for
    production or distribution. C1 PLL and C2 PLL LNBFs not displaying the
    Titanium Satellite mark infringe on our intellectual development, registered
    trademarks and proprietary designs. If you have been fooled into buying a
    C-band PLL clone, please immediately contact us and we will let you
    know how easy it is to exchange it for a genuine Titanium Satellite PLL
    product.
    C1W-PLL Wideband LNBF Specifications
    Input Frequency Range
    3.40 ~ 4.20GHz
    Output Frequency Range
    950 ~ 1750MHz
    L.O. Frequency
    5150MHz
    Noise Temperature
    15K typical
    LO Stability (over temp ex offset)
    ± 50Khz /
    ± 10Khz at operational temperature
    LO Phase Noise @ 1Khz
    -72dBc
    LO Phase Noise @ 10Khz
    -81dBc
    LO Phase Noise @ 100Khz
    -90dBc
    Conversion Gain
    65dB typical
    Gain Flatness
    ±4dB
    Gain Variation
    ±1dB / 27 MHz
    Image Rejection
    -45dB
    Crosstalk Isolation
    20dB typical
    Control Signals Ca [V/CR]
    11.5 ~ 14.0V
    Control Signals Cb [ H/CL]
    16.0 ~ 20.0V
    DC Voltage
    11 ~ 20Vdc
    Current
    145mA [max]
    Output VSWR
    2.0 : 1
    Temperature Range
    -22 ~ +140°F / -40 ~ +60°C
    Relative Humidity
    0 ~100% condensing
    Polarization Type (cast ±45° scale)
    Linear (w/dielectric for circular)
    Output Impedance
    75Ω
    Connection
    F-Type / 3GHz / Female
    Weight
    10.1oz / 286g
    Construction
    Precision Cast Aluminum
    Hardware
    Silver Zinc Coated Steel Allen Head (w/tool)
    Housing / Scalar Finish
    Polyurethane Powder (chip resistant)
    Color
    Snow White / Natural Cooling Fin
    Feedhorn Cover
    RF Low-loss (blue color)
    Dimensions (w/o scalar)
    7⅝ (l) x 4⅜ (h) x 2¾ (w) in 185 (l) x 87 (h) x 68 (w) mm
    Scalar Type *
    Flat – Prime Focus, 3 Ring
    F/D with included Flat Scalar
    0.32 ~ .44+ (cast scale)
    Mount Type with Flat Scalar
    Single pole, Tripod or Quad legs
    * Optional Conical Scalar Kit – SC1
    Offset Type Dish with F/D .5 ~ .8
    Shipping Information:
    20 Giftboxes to a Master Carton
    Giftbox:
    7.75 L x 6.75 D x 4.5 H in. 1.3lbs
    20 L x 17 D x 11 H cm 600g
    Master Carton:
    23 x 17 x 14 in. 31 lbs
    57.5 x 42 x 35.5 cm 14.06kg
    † The C1-PLL ®, C2-PLL ®, C1WPLL and C2WPLL logos are trademarks of Titanium Satellite

    Main Menu