C-band LNBF C1-PLL – WiFi 4G LTE Interference Filter- Phase Lock Loop Satellite

Best Stability! Excellent Performance! High Quality Hardware!
Titanium Satellite C1 PLL
®
C-band LNBF
(3.7 – 4.2GHz)
Phase Lock Loop LNBF with WiMAX 4G LTE Wide Area WiFi Radar Interference Filter
Check out a review of the C1-PLL Wideband LNBF in
Tele AudioVision magazine
Why Buy from Titanium Satellite?
We are Satellite Experts with over 30 years experience with residential / commercial installation and service. Absolutely the best customer support for every product we sell! If we don’t use it in our own homes, we don’t sell it!
World’s first PLL C-band LNBF with WiMAX 4G LTE WiFi Radar Filter
The Titanium Satellite
C1-PLL
® features WiMax,4G LTE, wide area WiFi interference filter and the simplicity of
voltage controlled polarity selection with exceptional performance and
stability required for reliable reception of S2, high FEC and narrow
bandwidth satellite transponders. The filter eliminates the interference caused by WiMax, 4G LTE and wide area WiFi. Soft filter with 3dB attenuation from 3.6-3.7GHz, hard elimination notch filter below 3.6GHz.
Performance
This innovative single output model is developed using the latest PLL
chipsets with a balance of gain, isolation, stability and amplification
to produce a Phase Look Loop C-Band LNBF that outperforms all other
C-Band LNBFs. All Titanium Satellite products are factory line tested
multiple times to assure specification compliance and performance. In
addition, all products are inspected by an independent third party
service to insure complete manufacturing and performance compliance. Any
product found not to meet our exacting “A” grade requirements is either
reworked and certified to “A” grade performance or destroyed. Unlike
competitors, there is no 2nd market for “B” grade Titanium products!
Cool
We have all heard the comment, “Looks Aren’t Everything”. This statement
is so true! The
C1-PLL
with the heavy cast aluminum mass and thick wall
housing sports a glossy snow white color protective finish. This
attractive finish with offsetting cool grey and black hardware not only
looks great, but it also reduces overheating when exposed to direct
sunlight. The natural color aluminum cooling fins also assist in
dissipating heat from the electronics and body mass resulting in a lower
operating temperature with increased performance.
Design
The craftsmanship, quality components and innovative design make the
C1PLL
superior to any C-band LNBF available on the market. The
C1-PLL
is provided with a secure fitting, Royal Blue color feedhorn cover,
dielectric slab insert for circular C-band reception and mounting
hardware. The included universal flat type three ring scalar is tapped
for mounting on button hook, three and four leg prime focus dish
designs. All Titanium
hardware is secured with the provided Allen Head type screws and key
tool.
WaterProof
Titanium Satellite also introduces to C-band LNBF production the
waterproof, 3GHz F-fitting coax connection. After noting
the cheap coax connections used on several competitor C-band LNBFs which
had clinch point damage after only a few insertions, we requested the
manufacturer to source a component upgrade to a 3GHz fitting. Yes, the
upgraded fitting costs 10 cents more, but why go cheap?
Value
While a traditional corotor design with the mechanical polarity
controller provides increased performance and fine-tuning adjustments
for overcoming interference and optimizing reception, many hobbyists and
satellite viewers do not wish to be bothered with the additional
expense, complexity and control limitations of this traditional feedhorn
design. The
C1-PLL
is a simple way to increase performance and signal
reliability of your BUD (Big Ugly Dish) without breaking the bank! The
low MSRP yields a solid investment in improving your C-band system
performance.
Comparison
How does the
C1 PLL
perform? The
C1PLL
is setting new
performance standards for next generation C-band LNBFs!
Important Notice:
Titanium Satellite is the developer of the world’s first PLL LNBFs.
Don’t be fooled by imitations, clones and copycats with their inferior
performance. These copied products may carry our trademark C1 PLL and
C2 PLL model names, but they are not the original Titanium Satellite
products and are not licensed or authorized by Titanium Satellite for
production or distribution. The C1PLL and C2PLL LNBFs not displaying the
Titanium Satellite mark infringe on our intellectual development,
trademarks and proprietary designs. If you have been fooled into buying a
C-band PLL clone, please immediately contact us and we will let you
know how easy it is to exchange it for a genuine Titanium Satellite PLL
product.
C1-PLL
Specifications
Input Frequency Range
3.70 ~ 4.20GHz
Output Frequency Range
950 ~ 1450MHz
L.O. Frequency
5150MHz
Noise Temperature
15K typical
LO Stability (over temp ex offset)
± 50Khz
/
± 10Khz at operational temperature
LO Phase Noise @ 1Khz
-72dBc
LO Phase Noise @ 10Khz
-81dBc
LO Phase Noise @ 100Khz
-90dBc
Conversion Gain
65dB typical
Gain Flatness
±4dB
Gain Variation
±1dB / 27 MHz
Image Rejection
-45dB
Crosstalk Isolation
20dB typical
Control Signals Ca [V/CR]
11.5 ～ 14.0V
Control Signals Cb [ H/CL]
16.0 ～ 20.0V
DC Voltage
11 ~ 20Vdc
Current
145mA [max]
Output VSWR
2.0 : 1
Temperature Range
-22 ~ +140°F / -40 ~ +60°C
Relative Humidity
0 ～100% condensing
Polarization Type (cast ±45° scale)
Linear (w/dielectric for circular)
Output Impedance
75Ω
Connection
F-Type / 3GHz / Female
Weight
10.1oz / 286g
Construction
Precision Cast Aluminum
Hardware
Stainless Steel Allen Head (w/tool)
Housing / Scalar Finish
Polyurethane Powder (chip resistant)
Color
Snow White / Natural Cooling Fin
Feedhorn Cover
RF Low-loss (blue color)
Dimensions (w/o scalar)
7⅝ (l) x 4⅜ (h) x 2¾ (w) in 185 (l) x 87 (h) x 68 (w) mm
Scalar Type *
Flat – Prime Focus, 3 Ring
F/D with included Flat Scalar
0.32 ～ .44+ (cast scale)
Mount Type with Flat Scalar
Single pole, Tripod or Quad legs
* Optional Conical Scalar Kit – SC1
Offset Type Dish with F/D .5 ～ .8
Shipping Information:
20 Giftboxes to a Master Carton
Giftbox:
7.75 L x 6.75 D x 4.5 H in. 1.3lbs
20 L x 17 D x 11 H cm 600g
Master Carton:
23 x 17 x 14 in. 31 lbs
57.5 x 42 x 35.5 cm 14.06kg
† The C1-PLL ®, C2-PLL ®, C1WPLL and C2WPLL logos are trademarks of Titanium Satellite